Nortel Communication Server 1000 Series Manual page 68

68 Installation and configuration
Figure 11
Daisy-chaining of multiple Fiber Remote Multi-IPE Interface units
Connecting the fiber-optic link
The fiber-optic link connects the local Fiber Remote Multi-IPE Interface
with the remote Fiber Remote Multi-IPE Interface. Each Fiber Remote
Multi-IPE Interface unit provides a transmit and a receive optical connector
for a non-redundant fiber-optic link or two transmit and two receive optical
connectors for a redundant fiber-optic link.
The fiber-optic cable fibers, at each end of the link, must be terminated
with ST optical connectors. Each connector plugs into the ST optical
connector on the Fiber Remote Multi-IPE Interface faceplate. For details
on how to engineer and handle the fiber-optic link and the fiber-optic
connectors, refer to
Copyright © 2007-2009 Nortel Networks
.
"Engineering the fiber-optic link" (page
Nortel Communication Server 1000
Fiber Remote Multi-IPE Interface Fundamentals
NN43021-556 03.01
11 May 2009
31).