Figure 12
DC power connection of the Fiber Remote Multi-IPE Interface unit
Connecting the AC/DC Power Converter
A Fiber Remote Multi-IPE Interface unit is optionally supplied with an
AC/DC Power Converter to supply power to one Fiber Remote Multi-IPE
Interface unit.
The AC/DC Power Converter plugs directly into a 110 V AC wall outlet.
The DC power cord extends from the Power Converter to the -48 V DC
power connector on the Fiber Remote Multi-IPE Interface unit I/O panel.
Refer to
Remote Multi-IPE Interface unit" (page 75)
source connection.
Copyright © 2007-2009 Nortel Networks
.
Figure 13 "DC system power source connection to the Fiber
Nortel Communication Server 1000
Fiber Remote Multi-IPE Interface Fundamentals
NN43021-556 03.01
11 May 2009
Fiber-optic equipment installation 73
for an illustration of this power