Nortel Quality Monitoring Installation Manual page 143

September 2007
Notes about the command line:
msiexec is the MSI engine.
/i - tells the MSI engine to install a package. The folder path in quotation
marks, "C:\[Agent-Install-Folder]\Nortel Quality Monitoring Agent.msi
", tells the MSI engine where to find the package to install.
/q – Tells the MSI engine to run without any user interface.
For additional command line parameters for the MSI engine please see:
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/msi/
setup/command_line_options.asp
Microsoft.
The remaining items in the command line are the properties described
above in "Properties for Configuration," on page 131.
msiexec /i "C:\Agent-Install-Folder\Nortel Quality
Monitoring Agent.msi " /q INSTALLDIR="C:\nortel"
AGENT_VERSION="V5" R6_METHOD="V5"
AGENT_MONITORING_ENABLED="TRUE" AGENT_LOGS="C:\nortel\logs"
CTI_BUTTON_GRP="CTI" CONNECT_SERVER_NAME="xyz"
CONNECT_SERVER_PORT="3010" MONITOR_BLOCK_VALUE="1"
ADDLOCAL=
"Capture,Capture_R5,AIM_R5_English,AIM,AIM_R5,AIM_R5_CTI"
Example 2: Setup.exe Launcher Example
This example shows property values for environments that require
manual log on.
This example launches 'setup.exe', which will install and configure the
Windows Installer 2.0 engine prior to launching the actual Agent
installation.
Notes about the command line:
/s - Tells the 'setup.exe' to run silently
/v – Tells 'setup.exe' to pass the commands that follow to the MSI
engine. Notice that the commands following /v must be enclosed in
double quotation marks, as shown in the example below.
Installation Guide
. This URL is subject to change by
Silent Agent Installation
143