Table 6-1.
Message Type/Field Name
User Stop Message
Acct-Status-Type
NAS-IP-Address, Port,
Port-Type
Username
Calling-Station_ID
Called-Station-ID
Service-Type
Tunnel-Type
Tunnel-Media-Type
Acct-Client-Endpoint
Tunnel-Server-Endpoint
Acct-Tunnel-Connection-ID
Statistics
Gateway Accounting Messages
The gateway sends messages to the customer RADIUS server accounting for the
inbound usage. These messages are equivalent to the user's authorized service, as
if the user had dialed in locally, with the addition of tunnel accounting
information.
customer's RADIUS server.
115623B Rev. 00
Service Provider Accounting Messages
Contents
Stop
Connection origination of call
The original contents of the user field
Either or both, if applicable
As user authorized
DVS or L2TP
(for Dial VPN, only DVS is valid)
IP
A string containing the IP address of the accounting client
system, and possibly other system-specific identifiers
A string containing the IP address of the tunnel server,
the circuit type, and an optional identifier.
A unique identifier generated on each end of the session
to identify this particular user tunnel session. Typically,
this is a numeric string encoding a tunnel identifier and/or
sequence number.
Connect time, bytes, messages in, messages out
Table 6-2
summarizes the messages that the gateway sends to the
BayStream Multiservice Software Version 7.2
Configuring TMS Using Local RADIUS
(continued)
6-7