Before You Begin - Bay Networks Baystream 7 Configuration And Troubleshooting Manual

Before You Begin

Make sure that you are running the latest version of Bay Networks Site Manager,
Remote Annex, and router software. For instructions, refer to Upgrading Routers
from Version 7–11.xx to Version 12.00.
Conventions
angle brackets (< >)
bold text
brackets ([ ])
ellipsis points
italic text
quotation marks (" ")
screen text
separator ( > )
xvi
Indicate that you choose the text to enter based on the
description inside the brackets. Do not type the
brackets when entering the command.
Example: if command syntax is
you enter ping 192.32.10.12
Indicates text that you need to enter, command names,
and buttons in menu paths.
Example: Enter wfsm &
Example: Use the
Example: ATM DXI > Interfaces > PVCs identifies the
PVCs button in the window that appears when you
select the Interfaces option from the ATM DXI menu.
Indicate optional elements. You can choose none, one,
or all of the options.
Horizontal (. . .) and vertical
omitted information.
Indicates variable values in command syntax
descriptions, new terms, file and directory names, and
book titles.
Indicate the title of a chapter or section within a book.
Indicates data that appears on the screen.
Example:
Set Bay Networks Trap Monitor Filters
Separates menu and option names in instructions and
internal pin-to-pin wire connections.
Example: Protocols > AppleTalk identifies the
AppleTalk option in the Protocols menu.
Example: Pin 7 > 19 > 20
BNX Software Version <x.x>
ping <ip_address>
command.
dinfo
. .
. ( ) ellipsis points indicate
Test Part Number
,