Additional Planning Information - Bay Networks Baystream 7 Configuration And Troubleshooting Manual

This appendix contains an expanded network planning worksheet
you may want to use in determining how to configure the BayStream side of your
Dial VPN network. Use it with the information that you recorded at the end of
Chapter
filling it in as you go along will provide documentation for your network. You may
also find this information useful when changing or troubleshooting your network.
Table A-1. Network Information Worksheet
Requested Information
Physical Connector Information
Enter the slot number containing the link module that provides the initial IP
network interface. (This module can reside in any slot that is designated for
link module support.)
Note: You also provide the module number for the BayStream platform
(example - Module1).
Example: 2 QE/NF
Number of the connector (port) providing the initial IP network interface.
Example: 1. XCVR1
Circuit Information
Enter the number of the circuit name.
Example: 1. E21
115623B Rev. 00

Additional Planning Information

1. You may not have enough information yet to complete this table, but
BayStream Multiservice Software Version 7.2
Appendix A
(Table A-1) that
Your Information
(continued)
A-1