Bay Networks Baystream 7 Configuration And Troubleshooting Manual page 102

Configuring and Troubleshooting Bay Dial VPN Services
3.
4.
5.
6.
7.
8-6
Click Edit Circuit.
The Circuit Definition window appears. The following steps add IPX and RIP
and SAP.
Check IPX and RIP/SAP from the list of protocols.
Enter the Novell Configured Network Number (in hex) of your Ethernet
interface.
This is the same as the Novell server external network number when the
server is locally attached to the same Ethernet segment. For example, enter
0x00000055 for the network shown in
Make sure that the encapsulation is correct for the interface you are
configuring. Click OK to accept your selection.
For example, Figure 8-1
ETHERNET_II is the correct encapsulation type. To see the list of valid
values, click Values. The following list shows the relationship between
interface types and encapsulation types.
Novell Encapsulation
Medium
Terminology
Ethernet Ethernet_II
Ethernet Ethernet_802.2
Ethernet Ethernet_802.3
Ethernet Ethernet_SNAP
Token Ring Token Ring
Token Ring Token Ring_SNAP
FDDI FDDI_802.2
FDDI FDDI_SNAP
frame relay Frame_Relay_SNAP
PPP PPP
Click on File > Exit to return to the main Configuration Manager
window.
BayStream Multiservice Software Version 7.2
Figure
shows an Ethernet interface for this circuit, so
8-1.
Bay Networks Encapsulation
Terminology
Ethernet
LSAP
Novell
SNAP
LSAP
SNAP
LSAP
SNAP
SNAP
PPP
115623B Rev. 00