Bay Networks Baystream 7 Configuration And Troubleshooting Manual page 180

config file, 4-5, C-4
config, TMS parameter, 5-11
Configuration Manager, 11-3, 11-10
configuration map, 11-14
configuration tools, 11-2
configuring
adjacent host, 9-6
adjacent host and static route, 9-2
Dial VPN, 1-4, 3-1
dial-in node for IPX, 8-3
Remote Annex software, 4-2, C-1
static route, 9-6
congestion, traffic, 11-5
connection delays when using name
connection, starting, 2-10
connectivity problems, 11-12
console cabling, 3-4
console operating parameters, 3-3
console, ASCII, 3-3
control superuser command, 11-17
corporate/home network, 3-3
CPE router, 1-5, 1-6, 3-3, 9-1
adjacent host and static route, 9-2
configuring for IPX, 8-5
configuring frame relay, 8-7
customer premise equipment, 1-3
frame relay connection, 9-7
customer network, 3-3
customer premise equipment, 1-3, 1-6
D
data terminal equipment (DTE), 1-5
database
alternatives, 5-11
TMS, 2-6, 5-1
troubleshooting errors, 11-25
decapsulation
packet, 1-1
process, 2-14
default service record, 9-7
delete tms_dbm command, 5-4
Index-2
servers, 11-17
BayStream Multiservice Software Version 7.2
destination site, 3-3
diagnostic steps, 11-9
diags command, 11-9
Dial VPN
configuration, 1-4
configuring for IPX, 8-3
enabling and activating, 10-2
installing and configuring, 3-1
overview, 2-2
removing/disabling, 10-6
dialed number (DNIS) parameter, 5-3
dial-in port, Remote Annex, 4-2, C-2
dial-up router, 1-4
disabling Dial VPN, 10-6
DLCI, 9-1
address, 9-3
learning from network, 9-7
DNIS, 2-5
dialed number, 5-3
dnis, TMS parameter, 5-6
documentation, related, 3-2
domain name, 5-2
domain, TMS parameter, 5-6
Domain/0 key, 2-6
Domain/DNIS key, 2-6
DTE (data terminal equipment), 1-5
dumb terminal, 3-3
dynamic IP address assignment, 2-7, 2-12
dynamic mode, 11-10
dynamic_address_allocation_protocol, TMS
parameter, 5-9
E
edge node, 3-1
EEPROM parameters, 4-2, C-2
enabling Dial VPN, 10-2
encapsulated packet statistics, 11-12
encapsulation
process, 2-14
encapsulation, packet, 1-1
115623B Rev. 00