Bay Networks Baystream 7 Configuration And Troubleshooting Manual page 149

Table A-1. Network Information Worksheet
Requested Information
MTU size for OSPF packets (Default, Ethernet Size, User-defined MTU).
Example: Default
OSPF interface type (Broadcast, NBMA, or Point-to-Point,
Point-to-Multipoint, Point-to-Multipoint [std]).
Note: Match the interface type. The interface type, hello interval, and dead
interval must match the current OSPF configuration of the network.
Example: Broadcast
Hello interval (in seconds).
Example: 10
Router dead interval (in seconds).
Example: 40
Router priority.
Example: 1
Poll interval.
Example: 20
If you are configuring OSPF neighbors, what is the IP address for each
neighbor?
Note: Neighbors are defined only if the OSPF interface type is NBMA.
Example: Not applicable; sample format:
192.32.156.8
192.32.156.9
Static Route to Site Manager Configuration Information
Destination network.
Example: 192.32.90.0
Destination network mask.
Example: 255.255.255.0
Next-hop address that is in the same subnet as the initial IP interface.
Example: 192.32.4.99
Miscellaneous Information
Set SNMP Community Management?
Example: No
115623B Rev. 00 BayStream Multiservice Software Version 7.2
Additional Planning Information
(continued)
Your Information
(continued)
A-3