Bay Networks Baystream 7 Configuration And Troubleshooting Manual page 77

Table 5-2. tms_dbm Command Arguments
Argument
saddr= secondary_dynamic_address
_assignment_server_addr
authp= authentication_protocol
acctp= accounting_protocol
addrp= dynamic_address_allocation
_protocol
115623B Rev. 00
Function
Specifies the IP address of the
secondary dynamic address assignment
server. You must not specify a
secondary server without specifying a
primary server.
Specifies the authentication protocol
used between the gateway and the
authentication server. For remote
authentication, this value must be
radius. For local authentication, this
value can be acp.
Specifies the accounting protocol used
between the gateway and the
accounting server. The only valid value
is radius. Specify none to disable
accounting.
If you specify this protocol, you must
also specify a primary server.
Specifies the dynamic address
allocation protocol used between the
gateway and the dynamic address
allocation server. Specify DHCP to
enable dynamic allocation or none to
disable it.
If you specify this protocol, you must
also specify a primary server.
BayStream Multiservice Software Version 7.2
Configuring TMS for an erpcd-based Network
(continued)
Used with These
Commands
Optional for add and
modify. Not used for other
commands.
Required for add and
modify. Not used for other
commands.
Required for add and
modify. Not used for other
commands.
Required for add and
modify. Not used for other
commands.
(continued)
5-9