Bay Networks Baystream 7 Configuration And Troubleshooting Manual page 183

pauth, TMS parameter, 5-8
permanent virtual circuit (PVC), 1-3, 9-7
physical connector worksheet
ping command, 11-12
ping -t superuser command, 11-22
platforms supported, 1-2
Point-to-Point Protocol. See
pool, IP address, 2-10
port, modem, 3-3
portable host, 1-4
PPP, 1-4, 4-2, 9-1, C-2
definition
packet contents, 2-15
PPP worksheet information, A-5
preventing problems, 11-2
PRI interface, 1-5
primary secret, 9-1
primary_accounting_server_addr, TMS
primary_authentication_ server_addr, TMS
5-8
primary_dynamic_address_assignment_server_addr,
TMS parameter, 5-8
problems
connectivity, 11-12
preventing, 11-2
symptoms, 11-4
symptoms and likely causes, 11-6
tunnel, 11-24
PROM, 11-3
protocol
GRE, 1-1
stack, 1-4
troubleshooting, 11-15
proxy RADIUS, 2-11
PSTN, 1-5
public-switched telephone network
PVC, 1-3, 9-7
Q
Quick Get statistics tool, 11-11
115623B Rev. 00
information, A-1
PPP
parameter, 5-8
parameter,
(PSTN), 1-5
BayStream Multiservice Software Version 7.2
Quick-Start
installation script (install.bat), 1-7
procedure, 3-3
R
RADIUS, 1-2
authentication request, 1-7
client, 1-5, 1-7, 9-1
client on gateway, 7-3
Remote Authentication Dial-In User Service
remote authentication server, 1-7
server, 1-5, 7-3, 9-1
RADIUS server
configuring for IPX, 8-8
RADIUS-only solution, 6-1
RAS, 1-5
rases, TMS parameter, 5-11
rekey tms_dbm command, 5-4
related documents, 3-2
Remote Access Concentrator
8000/5399, 3-1
Remote Access Concentrator
Remote Access Concentrator(RAC), 1-2
remote access server, 1-5
Remote Annex
4000/5390, 1-2, 1-4, 3-1, 3-3
6100/5391, 1-2, 1-4, 3-1
6300/5393, 1-2, 1-4, 3-1, 4-5, 5-3, C-4
command line interface (CLI), 11-2
dial-in port, 4-2, C-2
enabling IPX, 8-5
managing, 10-1
troubleshooting, 11-16
Remote Annex syslog messages, B-1
Remote Authentication Dial-In User Service.
RADIUS
remote node, 1-2, 1-4
address, 2-11
configuring, 9-1
making a connection, 2-10
remote routing, 3-3
remote user, 1-1, 1-2, 5-1
(RAC), 1-4
See
Index-5