Bay Networks Baystream 7 Configuration And Troubleshooting Manual page 185

synchronous traffic, 1-5
syslog
daemon, 11-8
displaying, 11-9
enabling, 4-6, C-4
messages, B-1
Remote Annex messages, B-1
TMS messages, B-4
use in diagnosing problems, 11-8
system log
displaying event messages, 11-9
use in diagnosing problems, 11-8
T
takey, TMS parameter, 5-10
takey, tunnel authentication key, 5-2
tamode, TMS parameter, 5-10
tap superuser command, 11-17
target does not respond message, 11-13
tatype, TMS parameter, 5-10
TCP/IP protocol stack, 1-4
te, TMS parameter, 5-6
te_addr, TMS parameter, 5-6
telnet command, 11-19
TELNET worksheet information, A-4
terminal emulation, 3-3
TFTP
worksheet information, A-4
TMS
commands, 5-4
database, 5-1
description, 2-5
managing, 10-1
Tunnel Management System, 1-6
TMS database, 5-4
alternatives, 5-11
description, 2-6
troubleshooting, 11-25
TMS syslog messages, B-4
tms_dbm command arguments, 5-6
tms_dbm commands, 5-4
115623B Rev. 00 BayStream Multiservice Software Version 7.2
tool, configuration, 11-2
traceroute facility (RFC 1493), 11-22
traffic
asynchronous and synchronous, 1-5
congestion, 11-5
troubleshooting, 11-1
preparation, 11-4
Remote Annex problem, 11-16
Site Manager problem, 11-15
specific protocols, 11-15
TMS database errors, 11-25
tunnel problems, 11-24
worksheet, 11-4
tun_auth_key, TMS parameter, 5-10
tun_auth_mode, TMS parameter, 5-10
tun_auth_type, TMS parameter, 5-10
tunnel, 1-5
definition, 1-1, 5-1
endpoints, 1-1, 2-1, 5-1
statistics, 11-11
tearing down, 2-18
troubleshooting, 11-24
tunnel authentication key (takey), 5-2
tunnel management commands, 5-4
tunnel management software, 2-4
Tunnel Management System, 1-6, 5-4
database, 5-1
description, 2-5
managing, 10-1
See also TMS
tunnel_type, TMS parameter, 5-8
tunneling, definition, 2-1
tutype, TMS parameter, 5-8
U
unknown network message, 11-13
upgrading the network, 10-6
User Network Interface (UNI), 1-5
username, requirements, 2-11
Index-7