Tms Syslog Messages - Bay Networks Baystream 7 Configuration And Troubleshooting Manual

Table B-1. Remote Annex Syslog Messages Relevant to Dial VPN
Type
Error
(continued)
ACP Log File
(acp_logfile)
These are examples
of typical accounting
information for the
Annex.
Note: The ACP LOG FILE messages are not part of Dial VPN, but they may
be interspersed with Dial VPN messages in the syslog. Refer to your Remote
Annex documentation for a complete description of these messages.

TMS Syslog Messages

When an error occurs in the embedded code or TMS portion of erpcd, Dial VPN
records a message in the system log. If the condition is an access denial, the
embedded code logs the condition to the ACP log.
error conditions and associated error messages. During the authentication phase of
PPP, Dial VPN authenticates the user and creates the Dial VPN tunnels. Because
this activity takes place during authentication, Dial VPN reports any user
authentication or tunnel creation errors as a password or username error.
115623B Rev. 00
Syslog Contents
ppp:< port# >:DVS:tunnel registration failed:
<reason>
ppp:< port# >:DVS:tunnel registration renewal
failed: <reason>
< Annex_IP_Addr >:< id >:< port# >:
< date >:< time >:DVS:tunnel:login:< username >:
Success
< Annex_IP_Addr >:< id >:< port# >:< date >:
< time >:DVS:tunnel:logout:< username >
< Annex_IP_Addr >:< id >:< port# >:< date >:
< time >:DVS:tunnel:acct:< pkts_in >:< pkts_out >:
< bytes_in >:< bytes_out >:< username >
BayStream Multiservice Software Version 7.2
Syslog Messages
(continued)
Meaning
An error occurred during the
tunnel registration.
An error occurred during the
tunnel renewal phase. When the
system creates tunnels, it uses an
internal value to set the tunnel
lifetime. Before expiring, the
system reregisters, or renews the
tunnel. This error occurs when
there is a failure to renew the
tunnel.
Login succeeded.
User logged out.
This is accounting information for
the indicated port and tunnel.
Table B-2 lists the TMS-related
B-3