Table 5-2. Tms_Dbm Command Arguments - Bay Networks Baystream 7 Configuration And Troubleshooting Manual

Configuring and Troubleshooting Bay Dial VPN Services
Table 5-2. tms_dbm Command Arguments
Argument
domain=< new_domain>
dnis=< new_dnis>
te= te_addr
ha= ha_addr
5-6
Function
Together, domain and dnis constitute
an entry's key.
domain specifies the customer's
domain name, which may also include a
subdomain name. domain can be up to
48 characters long and must not include
the slash (/) character. The actual length
depends on the user's application. The
Annex allows up to 32 characters.
dnis specifies the dialed phone number.
This parameter is available only for
6300/5393 platforms. If dnis is not in
use, this must be 0. dnis can be up to
20 characters long and has the format:
*.* (.*)* By default, dnis is turned off for
all platforms. To turn dnis on, change
the erpcd source code and rebuild.
Specifies the IP address of the frame
relay port on the gateway in which the
tunnel endpoint (te) resides. The
address 0.0.0.0 is not valid. This is the
tunnel endpoint nearest the remote
user's home network.
For Dial VPN (Layer 3) tunnels, this is
the home agent, which tunnels packets
for delivery to the remote node and
maintains current location information
for the remote node.
Not used in Dial VPN Version 7.0,
Revision 6, and later versions. Specifies
the IP address of the frame relay port on
the gateway in which the home agent
(ha) resides. The address 0.0.0.0 is not
valid.
BayStream Multiservice Software Version 7.2
Used with These
Commands
Required for all but help,
for which it is optional.
With rekey, you must
specify
domain=< new_domain>
and
dnis=< new_dnis> ,
along with the original
domain and dnis.
Required for add and
modify. Not used for other
commands.
For compatibility with
previous versions, Dial
VPN recognizes this
parameter as equivalent to
tunnel endpoint, but it is no
longer a valid syntactical
element.
(continued)
115623B Rev. 00