Bay Networks Baystream 7 Configuration And Troubleshooting Manual page 95

9.
115623B Rev. 00
Configure the RADIUS client on the gateway.
The RADIUS client resides on the gateway and communicates with the
RADIUS server on the destination network to authenticate dial-in users at
remote nodes. Dial VPN supports both the authentication and authorization
functions of RADIUS. To configure the RADIUS client from the
Configuration Manager window, select Protocols > IP > Mobile IP >
VPN RADIUS.
This displays the Dial VPN RADIUS window, from which you can add or
delete a RADIUS client entry.
Click on the slot that corresponds to the home agent's interface.
a.
The window "Edit RADIUS for Slot <slot number>" opens.
Make sure that the Authentication parameter is set to Enable.
b.
If you want to enable dynamic IP addressing, set the Dynamic Client
c.
Addressing parameter to Enable.
You must also ensure that the corresponding RADIUS server is
configured to support dynamic IP address assignment and has a pool of
assignable addresses.
Specify the IP address of the RADIUS client.
d.
Accept the default values for all other parameters and click OK.
e.
This returns you to the Dial VPN RADIUS window.
Click on Servers.
f.
The Add RADIUS Server window opens.
Enter the IP address of the RADIUS server to which this client will
g.
connect, then click OK.
This address must be a valid IP address of an actual RADIUS server.
Clicking on OK displays the frame relay Switch VC List, showing the list
of currently configured RADIUS servers.
Specify the Primary Secret parameter.
h.
The gateway and the RADIUS server must each be configured with the
same secret.
Accept the default values for all the other parameters on this window,
i.
then click on Done.
BayStream Multiservice Software Version 7.2
Configuring the Gateway
7-3