Bay Networks Baystream 7 Configuration And Troubleshooting Manual page 139

Table 11-2. Remote Annex Troubleshooting Chart
Problem/Symptom
Network logins to BSD
hosts are invisible.
All network ports are in
use.
115623B Rev. 00
Possible Cause
The Annex user can use the
rlogin telnet
commands or
connect to a host, but the
pseudo-terminal does not show up in a
who
command display. This problem is
caused by a mismatch between
pseudo-terminals configured in the
/dev directory and pseudo-terminal
entries in /etc/ttys .
rlogin telnet
The or command is
rejected after the user name is entered
in response to the login prompt. The
error message "all network ports in
use" indicates that all available
pseudo-terminals are in use.
BayStream Multiservice Software Version 7.2
(continued)
Action
Update the /etc/ttys file to contain the
to proper number of pseudo-terminals as
indicated by the actual device entries in
/dev .
On BSD hosts, update /etc/ttys and
create more pseudo-terminals in /dev .
Troubleshooting
(continued)
11-19