Managing The Tms Default Database - Bay Networks Baystream 7 Configuration And Troubleshooting Manual

Table 6-3.
Field Name
Acct-Status-Type
NAS-IP-Address, Port,
Port-Type
Username
Calling-Station_ID
Called-Station-ID
Service-Type
Tunnel-Type
Tunnel-Media-Type
Acct-Client-Endpoint
Tunnel-Server-Endpoint
Acct-Tunnel-Connection-ID
Statistics

Managing the TMS Default Database

By default, you use the tms_dbm program to create TMS database entries as a file
in /usr/annex, the "security" directory. The tunnel management commands are the
same as those listed in
Network."
115623B Rev. 00
General Tunneling Attributes
Contents
Stop
Connection origination of call
The original contents of the user field
Either or both, if applicable.
As user authorized.
DVS or L2TP
(for Bay Dial VPN, only DVS is valid).
IP.
A string containing the IP address of the accounting client
system, and possibly other system-specific identifiers.
A string containing the IP address of the tunnel server,
the circuit type, and an optional identifier.
A unique identifier generated on each end of the session
to identify this particular user tunnel session. Typically,
this is a numeric string encoding a tunnel identifier and/or
sequence number.
Connect time, bytes, messages in, messages out.
Chapter 5, "Configuring TMS for an erpcd-based
BayStream Multiservice Software Version 7.2
Configuring TMS Using Local RADIUS
6-9