Table A-1. Network Information Worksheet - Bay Networks Baystream 7 Configuration And Troubleshooting Manual

Configuring and Troubleshooting Bay Dial VPN Services
Table A-1. Network Information Worksheet
Requested Information
IP Interface Configuration Information
IP address of this initial network interface.
(Advanced users only -- install.bat supports unnumbered interfaces.)
Example: 192.168.125.34
Subnet mask address of this initial network interface (in dotted decimal
notation).
Note: Install.bat supports the zero subnet mask. If you enter a valid zero
subnet mask, the install.bat script prompts you to enable zero subnets.
Example: 255.255.255.0
Does this interface connect to the same local area network (LAN) as the
Site Manager workstation?
Example: No
IP Routing Protocol Information
Use the IP Routing Protocol to configure this router remotely. This is
necessary only if you answered No to the previous question.
Example: RIP
See the following sections for details on the IP Routing Protocol you
choose to configure.
RIP Configuration Information
Should RIP listen to the default route to the network or subnet where Site
Manager is located?
Example: Yes
OSPF Configuration Information
OSPF Router IP Address.
Example: 192.32.156.7
OSPF Area Address.
Example: 0.0.0.0
Enable Simple Password Authentication?
Example: No
A-2 BayStream Multiservice Software Version 7.2
(continued)
Your Information
(continued)
115623B Rev. 00