Configuring The Dial Vpn Network Software - Bay Networks Baystream 7 Configuration And Troubleshooting Manual

Configuring and Troubleshooting Bay Dial VPN Services
2.
3.
Configuring the Dial VPN Network Software
You install the software and configure each of the Dial VPN software components
separately:
•
•
•
•
•
•
The following chapters describe how to do this installation and configuration,
referring you to the appropriate product-specific documentation, when necessary.
3-4
Connect the cable from the ASCII console to the gateway.
BCN and BLN routers have a 25-pin male console port. ASN routers have a
9-pin male console port. Refer to the installation guide that came with your
BayStream platform for more information.
Power on the BayStream platform to complete the internal diagnostics
and startup.
When the BayStream platform boots, the screen displays the Technician
Interface prompt. Configuring an Interface for Network Management
Login
describes the Quick-Start procedure in detail.
Install and configure the software on the Remote Annex or Remote Access
Concentrator.
Install and build the Tunnel Management database (and, for an erpcd-based
network, the Access Control Protocol database) on the server(s).
Install and configure BayStream software on the gateway (BayStream
platform) using Site Manager.
Install and configure Mobile IP and the RADIUS client software on the
gateway using Site Manager.
Ensure that the CPE router is configured for frame relay.
Ensure that the remote nodes (dial-in PCs or dial-up routers) are configured to
use PPP.
BayStream Multiservice Software Version 7.2 115623B Rev. 00