Conducting Tstserio Tests - Nortel CallPilot 702t Installation And Configuration Manual

October 2002

Conducting TSTSERIO tests

Introduction
The TSTSERIO command performs local loopback tests of the serial
communication ports from the server run-time environment.
Note: Before conducting these tests, shut down the appropriate services. See
"Shutting down services" on page 53.
.
.
TSTSERIO command syntax
The syntax for the TSTSERIO command is as follows:
TSTSERIO [/?] /P:comport [/S:subtstname] [/L:loops]
Flag
?
/P:comport
Part 5: 702t Server Maintenance and Diagnostics
CAUTION
Risk of communications loss
By stopping the services on COM 1 or COM 2, you lose the
support access feature.
CAUTION
Risk of stopping call processing
By stopping the services on COM 2, you stop call processing
on CallPilot.
Requirement
n/a
Required
Using serial port diagnostic tools
Description
Displays Help.
Specifies the symbolic port name
assigned to the port you want to test.
55