About This Document; Subject; Applicable Systems - Nortel Communication Server 1000 Manual

Hide thumbs Also See for Communication Server 1000:
Table of Contents

Advertisement

About this document

This document is a global document. Contact your system supplier or your
Nortel representative to verify that the hardware and software described
are supported in your area.

Subject

This document describes ISDN Basic Rate Interface (BRI) maintenance
tools and procedures to assist in identifying faults, locating defective units,
correcting problems by fixing or replacing defective units, and verifying
operation after the corrections or replacements have been made.
This document focuses on the maintenance of ISDN BRI equipment installed
in Meridian 1 and CS 1000M systems, and requires that non-ISDN BRI
functions operate correctly before starting to diagnose ISDN BRI problems.
Please note the following:
Note on legacy products and releases
This NTP contains information about systems, components, and features
that are compatible with Nortel Communication Server 1000 Release 4.5
software. For more information on legacy products and releases, click the
Technical Documentation link under Support & Training on the Nortel
home page:
www.nortel.com

Applicable systems

This document applies to the following systems:
Copyright © 2003-2007, Nortel Networks
.
ISDN BRI trunking is not supported in North America.
The Basic Rate Signaling Concentrator (BRSC) is not supported on
Small Systems and CS 1000S systems.
The integrated Meridian 1 Packet Handler (MPH) is not supported on
Small Systems and CS 1000S systems.
Communication Server 1000S (CS 1000S)
Communication Server 1000M Chassis (CS 1000M Chassis)
Nortel Communication Server 1000
ISDN Basic Rate Interface Maintenance
NN43001-718 01.01 Standard
Release 5.0 30 May 2007
7
Nortel Networks Confidential

Advertisement

Table of Contents
loading

Table of Contents