Config Diffserv Policy Create; Config Diffserv Policy Delete; Config Diffserv Policy Rename; Config Diffserv Policy Class Add - NETGEAR ProSafe GSM7312 User Manual

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

config diffserv policy create

This command establishes a new DiffServ policy. The
alphanumeric string from 1 to 31 characters uniquely identifying the policy. The type of policy is
specific to either the inbound or outbound traffic direction as indicated by the
Note: The policy type dictates which of the individual policy attribute commands are valid within
the policy definition.
Format

config diffserv policy delete

This command eliminates an existing DiffServ policy. The
of an existing DiffServ policy. This command may be issued at any time; if the policy is currently
referenced by one or more interface service attachments, this deletion attempt shall fail.
Format

config diffserv policy rename

This command changes the name of a DiffServ policy. The
existing DiffServ class. The
from 1 to 31 characters uniquely identifying the policy.
Format

config diffserv policy class add

This command creates an instance of a class definition within the specified policy for the purpose
of defining treatment of the traffic class through subsequent policy attribute statements. The
and
<policyname> <classname>
respectively. Note that this command causes the specified policy to create a reference to the class
definition.
Format
Differentiated Services
config diffserv policy create <policyname> <in/out>
config diffserv policy delete <policyname>
parameter is a case-sensitive alphanumeric string
<newpolicyname>
config diffserv policy rename <policyname>
<newpolicyname>
are the names of an existing DiffServ policy and class,
config diffserv policy class add <policyname>
<classname>
202-10009-01
parameter is a case-sensitive
<policyname>
parameter is the name
<policyname>
is the name of an
<policyname>
parameter.
<in/out>
9-15