Config Macfilter Adddest; Config Macfilter Deldest; Spanning Tree Commands - NETGEAR ProSafe GSM7312 User Manual

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
If all is selected, all ports will be removed from the source port filter set.
Format

config macfilter adddest

This command adds the <slot.port> to the destination filter set for the MAC filter with the given
<macaddr> and VLAN of <vlan>. The <macaddr> parameter must be specified as a 6-byte
hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
The <vlan> parameter must identify a valid VLAN.
The <slot.port> parameter identifies the destination port to be added to the destination port filter
set for the MAC filter.
If all is selected, all ports will be added to the destination port filter set.
Format

config macfilter deldest

This command removes a port from the destination filter set for the MAC filter with the given
<macaddr> and VLAN of <vlan>. The <macaddr> parameter must be specified as a 6-byte
hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
The <vlan> parameter must identify a valid VLAN.
The <slot.port> parameter identifies the destination port to be removed from the destination port
filter set for the MAC filter.
If all is selected, all ports will be removed from the destination port filter set.
Format

Spanning Tree Commands

This section provides detailed explanation of the spanning tree commands. The commands are
divided into two functional groups:
Switching Commands
config macfilter delsrc <macaddr> <vlan>
<slot.port|all>
config macfilter adddest <macaddr> <vlan>
<slot.port|all>
config macfilter deldest <macaddr> <vlan>
<slot.port|all>
202-10009-01
7-45