Config Dot1X Port Transmitperiod; Config Dot1X Port Supptimeout; Config Dot1X Port Servertimeout; Config Dot1X Port Maxrequests - NETGEAR ProSafe GSM7312 User Manual

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

config dot1x port transmitperiod

This command sets the value, in seconds, of the timer used by the authenticator state machine on
the specified port to determine when to send an EAPOL EAP Request/Identity frame to the
supplicant. The transmit period must be a value in the range of 1 and 65535.
Default
Format

config dot1x port supptimeout

This command sets the value, in seconds, of the timer used by the authenticator state machine on
this port to timeout the supplicant. The supplicant timeout must be a value in the range of 1 and
65535.
Default
Format

config dot1x port servertimeout

This command sets the value, in seconds, of the timer used by the authenticator on this port to
timeout the authentication server. The server timeout must be a value in the range of 1 and 65535.
Default
Format

config dot1x port maxrequests

This command sets the maximum number of times the authenticator state machine on this port will
retransmit an EAPOL EAP Request/Identity before timing out the supplicant. The max requests
value must be in the range of 1 and 10.
Default
Format

config dot1x port reauthperiod

This command sets the value, in seconds, of the timer used by the authenticator state machine on
this port to determine when reauthentication of the supplicant takes place. The reauthperiod must
be a value in the range of 1 and 65535.
Switching Commands
30
config dot1x port transmitperiod <slot.port> <1-
65535>
30
config dot1x port supptimeout<slot.port> <1-65535>
30
config dot1x port servertimeout <slot.port> <1-65535>
2
config dot1x port maxrequests <slot.port> <1-10>
202-10009-01
7-67