Quick Startup Physical Port Data - NETGEAR ProSafe GSM7312 User Manual

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

Quick Startup Physical Port Data

Quick Startup Physical Port Data
Table 6-2.
Command Details
Displays the Ports
show port all
Slot.Port - slot number.port number
Slot Options:
0 - the port is one of the physical ports
1 - a link aggregation group (LAG). The port number field in this case refers to the
LAG group ID.
3 - a VLAN group. The port field starts with 1 as the first VLAN group created in the
switch.
Port (when Slot value is 0):
GSM7324 - ports 1-24 are gigabit copper ports, ports 21-24 can also be used as
fiber ports
GSM7312 - ports 1-12 can be used as either copper or fiber ports
FSM7326 - ports 1-24 are fast Ethernet copper ports, ports 25-26 can be used as
copper or fiber ports
Type - indicates if the port is a special type of port
STP State - displays the Spanning Tree status
Admin Mode - selects the Port Control Administration State
Physical Mode - selects the desired port speed and duplex mode
Physical Status - indicates the port speed and duplex mode
Link Status - indicates whether the link is up or down
Link Trap - determines whether or not to send a trap when link status changes
LACP Mode - displays whether LACP is enabled or disabled on this port.
Quick Startup
202-10009-01
6-3