Config Lag Adminmode; Config Lag Linktrap; Config Lag Name; Config Lag Deletelag - NETGEAR ProSafe GSM7312 User Manual

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

config lag adminmode

This command enables or disables a LAG. The interface is a logical slot and port for a configured
LAG. The option all sets every configured LAG with the same administrative mode setting.
Format

config lag linktrap

This command enables or disables link trap notifications for the LAG. The interface is a logical
slot and port for a configured LAG. The option all sets every configured LAG with the same
administrative mode setting.
Default
Format

config lag name

This command defines a name for the LAG. The interface is a logical slot and port for a configured
LAG, and name is an alphanumeric string up to 15 characters. This command is used to modify the
name that was associated with the LAG when it was created.
Format

config lag deletelag

This command deletes an existing lag from the configuration. The interface is a logical slot and
port for a configured LAG. The all option removes all configured LAGs.
Format

config lag stpmode

This command sets the STP mode for a specific LAG. This is the value specified for STP Mode on
the Port Configuration Menu. 802.1D mode is the default. The interface is a logical slot and port
for a configured LAG. The all option sets all configured LAGs with the same option.
Format
7-28
config lag adminmode <logical slot.port|all>
<enable|disable>
enable
config lag linktrap <logical slot.port|all>
<enable|disable>
config lag name <logical slot.port|all> <name>
config lags deletelag <logical slot.port|all>
config lag stpmode <logical slot.port|all>
<off|802.1d|fast>
202-10009-01
Switching Commands