Config Vlan Makestatic; Config Vlan Participation; Config Vlan Port Tagging - NETGEAR ProSafe GSM7312 User Manual

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Default
Format

config vlan makestatic

This command changes a dynamically created VLAN (one that is created by GVRP registration) to
a static VLAN (one that is permanently configured and defined). The ID is a valid VLAN
identification number. VLAN range is 2-4094.
Format

config vlan participation

This command configures the degree of participation for a specific interface in a VLAN. The ID is
a valid VLAN identification number, and the interface is a valid interface number or all.
Format
Participation options are:
include
exclude
auto

config vlan port tagging

This command configures the tagging behavior for a specific interface in a VLAN. If tagging is
enabled, traffic is transmitted as tagged frames. If tagging is disabled, traffic is transmitted as
untagged frames. The ID is a valid VLAN identification number. The interface is a valid port
number or all.
Format
Switching Commands
The name for VLAN ID 1 is always Default. The name for other VLANs is
defaulted to a blank string.
config vlan name <name> <2-4094>
config vlan makestatic <2-4094>
config vlan participation <exclude|include|auto> <1-
4094> <slot.port|all>
The interface is always a member of this VLAN. This is equivalent to
registration fixed.
The interface is never a member of this VLAN. This is equivalent to registration
forbidden.
The interface is dynamically registered in this VLAN by GVRP. The interface
will not participate in this VLAN unless a join request is received on this
interface. This is equivalent to registration normal.
config vlan port tagging <enable|disable> <1-4094>
<slot.port|all>
202-10009-01
7-31