NETGEAR ProSafe GSM7312 User Manual page 179

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
This chapter contains the CLI commands used for the QOS Differentiated Services (DiffServ)
package.
This chapter is organized by command type:
• "General Commands" on page 9-3
• "Class Commands" on page 9-3
• "Policy Commands" on page 9-14
• "Service Commands" on page 9-27
• "Show Commands" on page 9-29
The user configures DiffServ in several stages by specifying:
• Class
– creating and deleting classes
– defining match criteria for a class
• Policy
– creating and deleting policies
– associating classes with a policy
– defining policy statements for a policy/class combination
• Service
– adding and removing a policy to/from a directional (i.e., inbound, outbound) interface
Additionally, the user can display summary and detailed information for each of the above
configuration elements. All configuration information is accessible via the CLI, Web, and SNMP
user interfaces.
Differentiated Services
Differentiated Services
202-10009-01
Chapter 9
9-1