Show Spanningtree Cst Port Summary - NETGEAR ProSafe GSM7312 User Manual

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Format
Bridge Priority
Bridge Identifier
Time Since Topology
Change
Topology Change Count
Topology Change
Designated Root
Root Path Cost
Root Port Identifier
Root Port Max Age
Root Port Bridge
Forward Delay
Hello Time
Bridge Hold Time
CST Regional Root
Regional Root Path Cost
Associated FIDs
Associated VLANs

show spanningtree cst port summary

This command displays the status of one or all ports within the common and internal spanning
tree. The parameter <slot.port/all> indicates the desired switch port or all ports.
Format
MST Instance ID
Slot.Port
Type
STP State
Port Role
Link Status
Link Trap
7-50
show spanningtree cst detailed
Configured value.
In seconds.
Number of times changed.
Boolean value of the Topology Change parameter for the switch indicating if a
topology change is in progress on any port assigned to the common and internal
spanning tree.
Value of the Root Path Cost parameter for the common and internal spanning
tree.
Derived value.
Derived value.
Derived value.
Configured value.
Minimum time between transmission of Configuration Bridge Protocol Data
Units (BPDUs).
List of forwarding database identifiers currently associated with this instance.
List of VLAN IDs currently associated with this instance.
show spanningtree cst port summary <slot.port/all>
CST
The interface being displayed.
Currently not used.
The forwarding state of the port in the specified spanning tree instance.
The role of the specified port within the spanning tree.
The operational status of the link. Possible values are "Up" or "Down".
The link trap configuration for the specified interface.
202-10009-01
Switching Commands