Config Spanningtree Bridge Maxage; Config Spanningtree Bridge Hellotime; Config Spanningtree Bridge Forwarddelay; Config Spanningtree Bridge Priority - NETGEAR ProSafe GSM7312 User Manual

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

config spanningtree bridge maxage

This command sets the Bridge Max Age parameter to a new value for the common and internal
spanning tree. The maxage <value> is in whole seconds within a range of 6 to 40, with the value
being less than or equal to "2 times (Bridge Forward Delay - 1)".
Default
Format

config spanningtree bridge hellotime

This command sets the Hello Time parameter to a new value for the common and internal
spanning tree. The hellotime <value> is in whole seconds within a range of 1 to 10 with the value
being less than or equal to "(Bridge Max Age / 2) - 1".
Default
Format

config spanningtree bridge forwarddelay

This command sets the Bridge Forward Delay parameter to a new value for the common and
internal spanning tree. The forwarddelay <value> is in whole seconds within a range of 4 to 30,
with the value being greater than or equal to "(Bridge Max Age / 2) + 1".
Default
Format

config spanningtree bridge priority

This command sets the Bridge Priority parameter to a new value for the common and internal
spanning tree. The bridge priority <value> is a number within a range of 0 to 61440. The twelve
least significant bits will be masked according to the 802.1s specification. This will cause the
priority to be rounded down to the next lower valid priority.
Default
Format

show spanningtree cst detailed

This command displays spanning tree settings for the common and internal spanning tree.
Switching Commands
20
config spanningtree bridge maxage <6-40>
2
config spanningtree bridge hellotime <1-10>
15
config spanningtree bridge forwarddelay <4-30>
32768
config spanningtree bridge priority <0-61440>
202-10009-01
7-49