User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
clear lag
This command clears all LAGs.
Format
clear stats port
This command clears the stats for a specified <slot.port>
Format
clear stats switch
This command clears the stats for the switch.
Format
clear igmpsnooping
This command clears the tables managed by the IGMP Snooping function and will attempt to
delete these entries from the Multicast Forwarding Database.
Format
reset system
This command resets the switch without powering it off. Reset means that all network connections
are terminated and the boot code executes. The switch uses the stored configuration to initialize
the switch. You are prompted to confirm that the reset should proceed. A successful reset is
indicated by the LEDs on the switch.
Format
Switching Commands
clear lag
clear stats port <slot.port>
clear stats switch
clear igmpsnooping
reset system
202-10009-01
7-79