Show Dot1X Port Stats - NETGEAR ProSafe GSM7312 User Manual

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Protocol Version
PAE Capabilities
Authenticator PAE State
Backend Authentication
State
Quiet Period
Transmit Period
Supplicant Timeout
Server Timeout
Maximum Requests
Reauthentication Period
Reauthentication Enabled
Key Transmission Enabled
Control Direction

show dot1x port stats

This command displays the dot1x statistics for a specified port.
Format
Port
EAPOL Frames Received
Switching Commands
The protocol version associated with this port. The only possible value is 1,
corresponding to the first version of the dot1x specification.
The port access entity (PAE) functionality of this port. Possible values are
Authenticator or Supplicant.
Current state of the authenticator PAE state machine. Possible values are
Initialize, Disconnected, Connecting, Authenticating, Authenticated, Aborting,
Held, ForceAuthorized, and ForceUnauthorized.
Current state of the backend authentication state machine. Possible values are
Request, Response, Success, Fail, Timeout, Idle, and Initialize.
The timer used by the authenticator state machine on this port to define periods
of time in which it will not attempt to acquire a supplicant. The value is
expressed in seconds and will be in the range 0 and 65535.
The timer used by the authenticator state machine on the specified port to
determine when to send an EAPOL EAP Request/Identity frame to the
supplicant. The value is expressed in seconds and will be in the range of 1 and
65535.
The timer used by the authenticator state machine on this port to timeout the
supplicant. The value is expressed in seconds and will be in the range of 1 and
65535.
The timer used by the authenticator on this port to timeout the authentication
server. The value is expressed in seconds and will be in the range of 1 and
65535.
The maximum number of times the authenticator state machine on this port will
retransmit an EAPOL EAP Request/Identity before timing out the supplicant.
The value will be in the range of 1 and 10.
The timer used by the authenticator state machine on this port to determine
when reauthentication of the supplicant takes place. The value is expressed in
seconds and will be in the range of 1 and 65535.
Indicates if reauthentication is enabled on this port. Possible values are True or
False.
Indicates if the key is transmitted to the supplicant for the specified port.
Possible values are True or False.
Indicates the control direction for the specified port or ports. Possible values are
both or in.
show dot1x port stats <slot.port>
The interface whose statistics are displayed.
The number of valid EAPOL frames of any type that have been received by this
authenticator.
202-10009-01
7-69