Config Diffserv Class Match Srcl4Port Range; Config Diffserv Class Match Srcmac - NETGEAR ProSafe GSM7312 User Manual

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Note: The srcl4port keyword, number, and range commands are alternative ways to specify a
source layer 4 port range as a match criterion.
Default
Format

config diffserv class match srcl4port range

This command adds to the specified class definition a match condition based on the source layer 4
port of a packet. The
<classname>
numbers are required and together they specify a contiguous port range. Each port number is an
integer from 0 to 65535, but with the added requirement that the second number be equal to or
greater than the first. The optional
condition for the class (i.e., match all source layer 4 ports except for those within the range
specified here).
Note: The srcl4port keyword, number, and range commands are alternative ways to specify a
source layer 4 port range as a match criterion.
Default
Format

config diffserv class match srcmac

This command adds to the specified class definition a match condition based on the source MAC
address of a packet. The
parameter is any layer 2 MAC address formatted as six, two-digit hexadecimal numbers separated
by colons (e.g., 00:11:22:dd:ee:ff). The
which need not be contiguous, and is formatted as six, two-digit hexadecimal numbers separated
by colons (e.g., ff:07:23:ff:fe:dc). The optional
this match condition for the class (i.e., match all source MAC addresses except for what is
specified here).
Default
Format
Differentiated Services
none
config diffserv class match srcl4port number
<classname> <0-65535> [exclude]
is the name of an existing DiffServ class. Two layer 4 port
parameter has the effect of negating this match
[exclude]
none
config diffserv class match srcl4port range
<classname> <0-65535> <0-65535> [exclude]
is the name of an existing DiffServ class. The
<classname>
<macmask>
none
config diffserv class match srcmac <classname>
<macaddr> <macmask> [exclude]
202-10009-01
parameter is a layer 2 MAC address bit mask,
parameter has the effect of negating
[exclude]
<macaddr>
9-13