User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
config spanningtree mst port priority
This command sets the priority for a specific port within a specific multiple spanning tree instance.
The instance <mstid> is a number that corresponds to the desired existing multiple spanning tree
instance. The <slot.port> is the desired switch port. The priority <value> is a number in the range
of 0 to 240 in increments of 16.
Default
Format
show spanningtree mst summary
This command displays summary information about all multiple spanning tree instances in the
switch.
Format
MST Instance ID List
For each MSTID:
Associated FIDs
Associated VLANs
show spanningtree mst detailed
This command displays settings and parameters for the specified multiple spanning tree instance.
The instance <mstid> is a number that corresponds to the desired existing multiple spanning tree
instance ID.
Format
MST Instance ID
MST Bridge Priority
Time Since Topology
Change
Topology Change Count
Topology Change in
Progress
Designated Root
Root Path Cost
Root Port Identifier
Associated FIDs
Associated VLANs
7-54
128
config spanningtree mst port priority <mstid>
<slot.port> <0-240>
show spanningtree mst summary
List of multiple spanning trees IDs currently configured.
List of forwarding database identifiers associated with this instance.
List of VLAN IDs associated with this instance.
show spanningtree mst detailed <mstid>
Time in seconds.
Number of times the topology has changed for this multiple spanning tree
instance.
Value of the Topology Change parameter for the multiple spanning tree instance.
Identifier of the Regional Root for this multiple spanning tree instance.
Path Cost to the Designated Root for this multiple spanning tree instance.
Port to access the Designated Root for this multiple spanning tree instance.
List of forwarding database identifiers associated with this instance.
List of VLAN IDs associated with this instance.
202-10009-01
Switching Commands