Switching Commands; System Information And Statistics Commands; Show Inventory - NETGEAR ProSafe GSM7312 User Manual

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
This chapter provides detailed explanation of the Switching commands. The commands are
divided into five functional groups:
• Show commands display switch settings, statistics, and other information.
• Config commands configure features and options of the switch. For every config command
there is a show command that displays the config setting.
• Transfer commands transfer configuration and informational files to and from the switch.
• Save commands save the switch configuration.
• Clear commands clear some or all of the settings to factory defaults.
This chapter is organized by configuration type:
• "System Information and Statistics Commands" on page 7-1
• "Management Commands" on page 7-13
• "Device Configuration Commands" on page 7-23
• "Spanning Tree Commands" on page 7-45
• "User Account Management Commands" on page 7-56
• "Security Commands" on page 7-58
• "System Utilities" on page 7-74

System Information and Statistics Commands

These commands display and configure system information and statistics.

show inventory

This command displays inventory information for the switch.
Format

Switching Commands

show inventory
202-10009-01
Switching Commands
Chapter 7
7-1