Show Spanningtree Cst Port Detailed; Config Spanningtree Cst Port Pathcost - NETGEAR ProSafe GSM7312 User Manual

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

show spanningtree cst port detailed

This command displays the settings and parameters for a specific switch port within the common
and internal spanning tree. The <slot.port> is the desired switch port
Format
Port Identifier
Port Priority
Port Forwarding State
Port Role
Port Path Cost
Designated Root
Designated Port Cost
Designated Bridge
Designated Port Identifier
Topology Change
Acknowledgement
Hello Time
Edge Port
Edge Port Status
Point To Point MAC Status
CST Regional Root
CST Port Cost

config spanningtree cst port pathcost

This command sets the Path Cost to a new value for the specified port in the common and internal
spanning tree. The <slot.port> is the desired switch port. The pathcost <value> can be specified as
a number in the range of 1 to 200000000 or auto. If "auto" is specified, the pathcost value will be
set based on Link Speed.
Default
Format
Switching Commands
show spanningtree cst port detailed <slot.port>
The port identifier for this port within the CST.
The priority of the port within the CST.
The forwarding state of the port within the CST.
The role of the specified interface within the CST.
The configured path cost for the specified interface.
Identifier of the designated root for this port within the CST.
Path Cost offered to the LAN by the Designated Port.
The bridge containing the designated port.
Port on the Designated Bridge that offers the lowest cost to the LAN.
Value of flag in next Configuration Bridge Protocol Data Unit (BPDU)
transmission indicating if a topology change is in progress for this port.
The hello time in use for this port.
The configured value indicating if this port is an edge port.
The derived value of the edge port status. True if operating as an edge port; false
otherwise.
Derived value indicating if this port is part of a point to point link.
The regional root identifier in use for this port.
The configured path cost for this port.
auto
config spanningtree cst port pathcost <slot.port> <1-
200000000/auto>
202-10009-01
7-51