Show Router Route Preferences; Config Router Route Create; Config Router Route Delete; Config Router Route Preference - NETGEAR ProSafe GSM7312 User Manual

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

show router route preferences

This command displays detailed information about the route preferences. Route preferences are
used in determining the best route. Lower router preference values are preferred over higher router
preference values.
Format
Local
Static
OSPF Intra
OSPF Inter
OSPF Type-1
OSPF Type-2
RIP
BGP4

config router route create

This command configures a static route. The <networkaddr> and <nexthopip> are valid ip
addresses. The <subnetmask> is a valid subnet mask. The [metric] parameter is an integer value
from 0 to 255. The default value is 1.
Format

config router route delete

This command causes a static route to be deleted. The <networkaddr> and <nexthopip> are valid
IP address. The <subnetmask> is a 4-digit dotted-decimal number representing a valid Subnet
Mask.
Format

config router route preference

This command sets the route preference value of local and static routes in the router. Lower route
preference values are preferred when determining the best route.
Default
8-4
show router route preferences
The local route preference value.
The static route preference value.
The OSPF Intra route preference value.
The OSPF Inter route preference value.
The OSPF Type-1 route preference value.
The OSPF Type-2 route preference value.
The RIP route preference value.
The BGP-4 route preference value.
config router route create <networkaddr> <subnetmask>
<nexthopip> [metric]
config router route delete <networkaddr> <subnetmask>
<nexthopip>
Local -- 0; Static -- 60
202-10009-01
Routing Commands