Show Vlan Summary; Show Vlan Detailed - NETGEAR ProSafe GSM7312 User Manual

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
The mode is one of the following:
802.1d
fast
off

show vlan summary

This command displays a list of all configured VLANs.
Format
VLAN ID
VLAN Name
VLAN Type

show vlan detailed

This command displays detailed information, including interface information, for a specific
VLAN.
Format
VLAN ID
VLAN Name
VLAN Type
Slot.Port
Switching Commands
IEEE 802.1D-compliant STP mode is used.
Fast STP mode is used.
STP is turned off.
show vlan summary
There is a VLAN Identifier (VID) associated with each VLAN. The range of the
VLAN ID is 1 to 4094.
A string associated with this VLAN as a convenience. It can be up to 16
alphanumeric characters long, including blanks. The default is blank. VLAN ID
1 always has a name of `Default`. This field is optional.
What type of VLAN this is. A VLAN can be the Default VLAN, (VLAN ID =
1), a static VLAN, one that is configured and permanently defined, or a
Dynamic VLAN, one that is created by GVRP registration. In order to change a
VLAN from Dynamic to Static, select Static from the Vlan Type pull-down
entry field. Once the VLAN is selected, click on Submit. This will change the
VLAN type to Static.
config vlan detailed <vlan id>, where the ID is a valid VLAN
identification number
There is a VLAN Identifier (VID) associated with each VLAN. The range of the
VLAN ID is 1 to 4094.
A string associated with this VLAN as a convenience. It can be up to 16
alphanumeric characters long, including blanks. The default is blank. VLAN ID
1 always has a name of `Default`. This field is optional.
What type of VLAN this is. A VLAN can be the Default VLAN, (VLAN ID =
1), a static VLAN, one that is configured and permanently defined, or a
Dynamic VLAN, one that is created by GVRP registration. In order to change a
VLAN from Dynamic to Static, select Static from the Vlan Type pull-down
entry field. Once the VLAN is selected, click on Submit. This will change the
VLAN type to Static.
Indicates by slot id and port number which port is controlled by the fields on this
line. It is possible to set the parameters for all ports by using the selectors on the
top line.
202-10009-01
7-29