Ospf Configuration; Vlan Routing; Rip Configuration - NETGEAR ProSafe GSM7312 User Manual

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

OSPF Configuration

The config commands used in the following example enable OSPF on ports 0.1 and 0.2
Table 6-11. OSPF Configuration Example
OSPF
config routing enable
config interface routing 0.1 enable
config interface routing 0.2 enable
config router id 192.150.2.1
config router ospf interface areaid 0.1 0.0.0.0
config router ospf interface areaid 0.2 0.0.0.0
config ip interface create 0.1 192.150.2.1 255.255.255.0
config ip interface create 0.2 192.150.3.1 255.255.255.0
config router ospf adminmode enable
config router ospf interface mode 0.1 enable
config router ospf interface mode 0.2 enable

VLAN Routing

This section provides examples of VLAN Routing for RIP and OSPF.

RIP Configuration

This example creates two router ports to run RIP 2.
Quick Startup
202-10009-01
6-9