Radius Client Configuration; Figure 8-4. Menu 23.2 - System Security - External Server - NETGEAR RT338 Reference Manual

RADIUS Client Configuration

To configure the router's RADIUS client:
From the Manager Interface Main Menu, open Menu 23 - System Security.
1.
Type 2 and press [Enter] to open Menu 23.2 - System Security - External Server as
2.
shown in Figure
Menu 23.2 - System Security - External Server
Figure 8-4. Menu 23.2 - System Security - External Server
Determine which port is used by your server software and set the Port # field in
3.
Menu 23.2.
The RADIUS authentication port was originally 1645 but was changed to 1812 in later
implementations.
You must reboot your router after changing the RADIUS port number.
Enter settings for the other menu items as described in
4.
Configuring Dial-In Access
8-4.
Authentication Server:
Active= No
Type: RADIUS
Server Address= ?
Port #= 1645
Key= ?
Press ENTER to Confirm or ESC to Cancel:
Reference Guide for the Model RT338 ISDN Router
Table 8-3.
8-9