Figure 7-8. Ip Static Routing Table Example - NETGEAR RT338 Reference Manual

Type 8 and press [Enter] to change to the Command Interpreter Mode.
2.
At the command prompt, type:
3.
ip route stat [Enter]
The command interpreter displays the static IP routing table as shown in the example in
Figure 7-8.
ras> ip rout stat
Dest FF Len Interface
192.168.0.0 00 24
default 00 0
ras>
Figure 7-8. IP Static Routing Table Example
After viewing the table, type "exit" to return to the menus.
4.
Remote Node Configuration
Gateway
enif0 192.168.0.1
wanIdle MyISP
Reference Guide for the Model RT338 ISDN Router
Metric stat Timer
1 041b 0
2 002b 0
Use
0
0
7-15