Unix Syslog And Accounting; Figure 11-5. Menu 24.3.2 - System Maintenance - Unix Syslog And Accounting; Table 11-5. System Maintenance - Syslog And Accounting Fields - NETGEAR RT338 Reference Manual

UNIX Syslog and Accounting

You can configure the router to send UNIX system logs to another machine. Use Menu 24.3.2 -
System Maintenance - UNIX Syslog and Accounting to configure UNIX Syslog and Accounting
as shown in Figure 11-5.
Menu 24.3.2 - System Maintenance - UNIX Syslog and Accounting
Figure 11-5. Menu 24.3.2 - System Maintenance - UNIX Syslog and Accounting
You must configure the parameters to activate syslog.
command descriptions for Menu 24.3.2 - System Maintenance - Syslog and Accounting.
Table 11-5. System Maintenance - Syslog and Accounting Fields
Field Command
Active Press the space bar to toggle between
yes and no.
Syslog IP Address Enter the address in dotted-decimal
notation such as a.b.c.d where a, b, c,
and d are numbers between 0 and 255.
Log Facility Press the space bar to toggle between
on and off.
System Maintenance
UNIX Syslog:
Active= No
Syslog IP Address= ?
Log Facility= Local 1
Types:
CDR= No
Packet triggered= No
Filter log= No
PPP log= No
POTS log= No
Press ENTER to Confirm or ESC to Cancel:
Reference Guide for the Model RT338 ISDN Router
Table 11-5 lists the fields, commands, and
Description
The syslog option is turned on or off.
This field is the IP address location to
send your syslog.
Seven different local options can be
selected. The log facility allows the
message to be logged to different files in
the server. Refer to your UNIX manual
for more detail.
11-7