Configuring Internet Access; Figure 6-1. Menu 4 - Internet Access Setup - NETGEAR RT338 Reference Manual

Reference Guide for the Model RT338 ISDN Router

Configuring Internet Access

Use Menu 4, Internet Access Setup, to configure the router for access to an Internet service
provider (ISP). When you complete this menu, the router automatically adds a Remote Node for
your ISP in Menu 11, using typical ISP configuration parameters in addition to those you have
specified in Menu 4. The router also creates a default static route for the ISP. After completing
Menu 4, you may go to Menu 11 and make modifications to any of the parameters. However, if
you return to Menu 4, make changes, and then save them, the ISP-related entries in Menu 11 revert
to typical ISP configuration parameters, possibly reversing any changes you have made to those
menus.
To configure your router for Internet access:
Enter 4 from the Main Menu to display Menu 4 - Internet Access Setup.
1.
Menu 4 - Internet Access Setup opens as shown in
Figure 6-1. Menu 4 - Internet Access Setup
Enter the name of your ISP in the ISP's Name field (for example, myISP).
2.
This information is for identification purposes only.
6-2
Menu 4 - Internet Access Setup
ISP's Name= MyISP
Pri Phone #= 5551212
Sec Phone #=
My Login= netgear
My Password= ********
Single User Account= Yes
IP Addr= 0.0.0.0
Telco Options:
Transfer Type= 64K
Multilink= Off
Idle Timeout= 300
Press ENTER to Confirm or ESC to Cancel:
Using the Manager Interface to Configure Internet Access
Figure 6-1.