Tr069 Client Configuration - NETGEAR DGN2200M User Manual

• Click Cancel to disregard any unsaved changes.
• Click Refresh to update the portmap table and to show the active ports that are
currently opened by UPnP devices.

TR069 Client Configuration

The TR-069 WAN management protocol allows auto-configuration, provisioning, collection,
and diagnostics to be performed by an Auto-Configuration Server (ACS).

To input the TR-069 Client settings:
1. Select TR069 to display the following screen:
2. Click Turn WAN Management Protocol On to enable TR069 Client.
3. Enter the configuration parameters:
• Inform Status. Select whether the DGN2200Mv2 can send data to the
Auto-Configuration Server.
• Inform Interval. The DGN2200Mv2 sends the inform data to ACS at the assigned
time interval periodically in order to get updated information.
• ACS URL. Input the IP address of the ACS server that the DGN2200Mv2 will connect
to.
• ACS Username. Enter the username the DGN2200Mv2 uses to connect to the ACS
server.
• ACS Password. Enter the password the DGN2200Mv2 uses to connect to the ACS
server.
4. Click Apply when done.
N300 Wireless ADSL2+ Modem Router DGN2200Mv2
Advanced Configuration
66