NETGEAR RT338 Reference Manual page 81

To configure the ISP Parameters Screen to dial your ISP:
Enter the login name (given to you by your ISP) in the User Name field.
1.
This field is case sensitive.
Enter the password (given to you by your ISP) in the Password field.
2.
Enter the password associated with the login name above. This field is case sensitive.
Enter the primary telephone number of your ISP and an alternate number if applicable.
3.
Enter the phone number in the correct format for dialing locally. Do not enter the area code
unless it is required for local dialing.
Note: In some areas, you must dial an ISDN data call using 1+area code or you will
receive a 56K connection instead of a 64K connection.
The router always calls your ISP using the primary number first. If the primary number is busy
or does not answer, the router calls the alternate number if one is available.
If you know that your ISP does not automatically transmit DNS addresses to the router
4.
during login, select "Use this server" and enter the IP address of the ISP's DNS server.
A DNS server is a host on the Internet that translates Internet names (such as www addresses)
to numeric IP addresses. Typically your ISP transfers the IP addresses of one or two DNS
servers to your router during login. If the ISP does not transfer an address, you must obtain it
from the ISP and enter it manually here.
Click on the Connect button at the bottom of the screen to perform the ISP Connection
5.
Test.
Using FirstGear to Configure Internet Access
Reference Guide for the Model RT338 ISDN Router
5-5