NETGEAR RT338 Reference Manual page 75

Enter your previous system password and press [Enter].
3.
Enter your new system password and press [Enter].
4.
Enter your new system password again for confirmation and press [Enter].
5.
You must enter this new password when you want to access the Manager through the serial port or
by a Telnet connection.
If you lose or forget the Manager password, you must clear the configuration of the router as
described in Chapter 12,
password to revert to the default, 1234.
Initial Router Configuration
"Troubleshooting." Clearing the configuration causes the Manager
Reference Guide for the Model RT338 ISDN Router
4-17