Terminal Baud Rate; Figure 11-4. Menu 24.2.2 - System Maintenance - Change Console Port Speed - NETGEAR RT338 Reference Manual

Table 11-3 lists the fields for Menu 24.2.1 - System Maintenance - Information. These fields are
read-only fields.
Table 11-3. System Maintenance - Information Fields
Field
Name
Routing
RAS S/W Version
Country Code
LAN
Ethernet Address
IP Address
IP Mask
DHCP

Terminal Baud Rate

You can change the baud rate of the serial Manager connection using Menu 24.2.2 - System
Maintenance - Change Console Port Speed as shown in
Menu 24.2.2 - System Maintenance - Change Console Port Speed
Figure 11-4. Menu 24.2.2 - System Maintenance - Change Console Port Speed
System Maintenance
Definition
The system name currently assigned to the router in Menu 1, General Setup.
This field displays IP, which is the only protocol routed.
The version and date of the current router software.
A decimal number indicating the region of operation. The country code for North
America is 255.
For the LAN port, the screen displays:
The Ethernet MAC address assigned to your router.
The IP address of the LAN interface of the router.
The netmask of the router's LAN IP address.
The current status of the router's internal DHCP server. The choices are either
None, Server, or Relay.
Console Port Speed: 9600
Press ENTER to Confirm or ESC to Cancel:
Reference Guide for the Model RT338 ISDN Router
Figure 11-4.
11-5