Three Way Calling - NETGEAR RT338 Reference Manual

Three Way Calling

The Three Way Calling feature lets you add a third party to an existing call. You must subscribe to
this service with your telephone company.
To add a third party to an existing call:
Press the flash hook button and immediately release it to put the existing call on hold and
1.
receive a dial tone.
Dial the phone number of the third party.
2.
When you are ready to conference the calls together, press the flash hook button and
3.
immediately release it to establish a Three Way Conference Call.
Note: If you want to cancel your attempt to establish the conference call because the
third party's line is busy or does not answer, simply hang up the phone and pick it back
up after it starts ringing to return to the first caller.
To drop the last call added to the three-way-call:
• Press the flash key.
The last call added to the conference is dropped.
To drop yourself from the conference call:
• While the two other callers remain on the line, hang up your phone. The ISDN network does
an implicit transfer to directly connect the two remaining callers.
Advanced Phone Features
Reference Guide for the Model RT338 ISDN Router
10-3