Connecting With Microsoft Windows Hyperterminal; Figure 3-1. Hyperterminal Window And Connection Description Dialog Box - NETGEAR RT338 Reference Manual

Connecting with Microsoft Windows HyperTerminal

Follow the procedure in this section to establish a connection with the router using the
HyperTerminal application in Window 95, Windows 98, and Windows NT. This procedure creates
and saves a new HyperTerminal session file for the router. You can use this session file the next
time you connect with the router using the serial connection.
To connect with the router using Microsoft Windows HyperTerminal:
Connect the router to your Windows PC using the serial cable.
1.
See "Connecting Through a Serial
Start Windows HyperTerminal.
2.
Click Start and choose Programs > Accessories > Hyperterminal > HyperTerminal.
The HyperTerminal window and Connection Description dialog box open as shown in
Figure 3-1. HyperTerminal Window and Connection Description Dialog Box
Preparing Your Network
Reference Guide for the Model RT338 ISDN Router
Port" on page 3-6 for more information.
Figure 3-1.
3-7