Switching To A Backup Isp; Figure 6-5. Menu 11.3 - Remote Node Network Layer Options - NETGEAR RT338 Reference Manual

Press Enter to open Menu 11.3.
11.
The Remote Node Network Layer Options menu opens as shown in
Menu 11.3 - Remote Node Network Layer Options
Figure 6-5. Menu 11.3 - Remote Node Network Layer Options
In Menu 11.3, set the subnet mask of the remote node to 0.0.0.0.
12.
Set RIP Direction to None.
13.
At the bottom of the Menu, press Enter to save Menu 11.3.
14.
At the bottom of Menu 11.1, press Enter to save Menu 11.1.
15.

Switching to a Backup ISP

If you need to switch from your primary ISP to a backup ISP:
Select Menu 11, and select your primary ISP.
1.
In Menu 11.1, set the Active field to No.
2.
At the bottom of Menu 11.1, press Enter to save the menu.
3.
Select Menu 11 again, and select your backup ISP.
4.
In Menu 11.1, set the Active field to Yes.
5.
At the bottom of Menu 11.1, press Enter to save the menu.
6.
You can now access the Internet through the backup ISP Remote Node.
Using the Manager Interface to Configure Internet Access
Rem IP Addr:
Rem Subnet Mask= 0.0.0.0
My WAN Addr= 0.0.0.0
Single User Account= No
Metric= 2
Private= No
RIP Direction= Both
Version= RIP-2B
Press ENTER to Confirm or ESC to Cancel:
Reference Guide for the Model RT338 ISDN Router
Figure 6-5.
6-9